תחזוקה
כיוונים וטיפולים ששומרים על האופניים מהירים, שקטים ובטוחים.
Tubeless setup
Converting a wheel to tubeless: tape the rim, fit a valve, mount the tyre with sealant and seat it with a burst of air. Forty-five minutes the first time, fifteen once you know it.
Pre-ride check
Five minutes before every ride that catch most mechanicals before they happen: tyres, brakes, axles, bars and the drivetrain, checked in one pass around the bike.
Chain care
A clean, lubed chain shifts better, runs quieter and saves the cassette and chainring. Clean and lube it every few rides and replace it before it wears out everything else.
Tyre pressure
The cheapest upgrade on any mountain bike. Too much air and the tyre skips and slides; too little and it squirms, burps and hits the rim. The right number depends on you, the tyre and the trail.
Suspension setup
Half an hour with a shock pump makes a bigger difference than most upgrades. Set the air pressure by sag, then rebound, then compression — one change at a time.
Brake bleed
Replacing the fluid in a hydraulic brake and pushing out the air bubbles that make the lever soft. Once a year, or whenever the lever feels spongy or pulls to the bar.